Force / Torque / Strain / Load Cell Indicator Model – 560

Force/Torque/Strain Indicator with High & Low Set point is the microcontroller based electronic system, used to measure the pressure or weight of a material. This is a compact system with 1 Row, 6 digit, 7 segment display and 5 different keys to enter the high & low set points.
This system consist the digital calibration facility, programmable through the keypad. Also the system consist various configuration settings like dot selection, power on- tare selection, resolution selection & overload limit set and user programmable two set points & two hysteresis.
System Specifications:
– 24 Bit Sigma Delta ADC used (10 Samples per second / 80 SPS).
– 8 bit microcontroller used (32 KB flash, 256 bytes EEPROM).
– 6 digit – seven segment display & 5 Keys (UP, DOWN, SHIFT, ENTER & TARE).
– Load Cell Excitation +5V & GND.
– 4-20mA pressure sensor – +12V Input.
– 2 Relay Outputs – 2 Set points with 2 Hysteresis.
– Analog Output – (0-10V) – Optional.
– RS232 output – 9600 baud rate – Optional.
– Peak Value Monitor & Manual peak Reset – Optional.